- Full Category Lists
- Home
- Pallet Rack
- Wire Deck
- Cantilever Rack
- Rivet Rack
- Wide Span Shelving
- Pushback Rack
- Carton Flow Rack
- Drive-in Rack
- AS/RS
- Specialty Rack
- Rack Accessories
- Bulk Rack Components
- Engineering Services
- About Hardy
- Search Racks and Accessories
Drive-in Rack
Drive-in rack is used to store large quantities of goods of the same type. When you have few SKU’s but a lot of them, drive-in rack may be right for you. It gives you a high density installation where a forklift can drive directly into/through the installed rack. You save on floor space while getting more pallet positions for your money.
We offer two designs with or without a end support stop giving you great FIFO stocking capability. Let us find the right drive-in system to fit your needs.
Drive-In Rack |
Drive-in rack systems are custom-made to order give us a call with your configuration or your needs and we will build the right solution for your needs. |
Description |
Wt / lbs Each |
Ga. |
Load / lbs |
Color |
| Pallet Support 36" 16 ga | 5 | 16 | - | Zinc Plated |
| Pallet Support 42" 16 ga | 5.3 | 16 | - | Zinc Plated |
| Pallet Support 48" 16 ga | 6.59 | 16 | - | Zinc Plated |
| Pallet Support 42" 14 ga | 7.3 | 14 | - | Zinc Plated |
| Safety Clip with Barrel End | 0.04 | - | Zinc Plated |
|
| 3 Rivet End Connector with Safety Clip | 1.01 | - | Unpainted |
|
| Row Spacer 8" 12 ga |
1.3 | 12 | - | Unpainted |
| Row Spacer 10" 12 ga |
1.7 | 12 | - | Unpainted |
| Row Spacer 12" 12 ga |
2.1 | 12 | - | Unpainted |
| Anchors 1/2" x 4" | 0.7 | - | Zinc Plated |
Phone: |
Hardy Storage Systems sells by container loads only.
Download an order form here and email or fax it to us.
